Skip to content

Top 10 Best alpine subwoofer Review in 2022

1. Alpine S-W8D2 S-Series Subwoofers

  • Features: 8″ subwoofer with dual 2-ohm voice coils, Kevlar reinforced pulp cone with HAMR Santoprene rubber surround, Frequency response: 34-200 Hz, Power handling: 300 watts RMS (150 watts per coil), Peak power handling: 900 watts, and Top-mount depth: 3-3/4″.

2. Alpine Electronics PWE-S8 Restyle Compact Powered 8-Inch Subwoofer , black

  • 8-inch subwoofer and 120W amplifier, housed together in a cast aluminum enclosure
  • The compact size measures just 13.5” L x 9” W x 3” D so it can be installed under or behind a seat in a truck, in a sedan’s trunk or in an SUV’s hatch
  • 32Hz-150Hz frequency response, Power Rating: 120W RMS. RCA (0.1-4V) / Speaker Input (1.5-30V/auto sensing)
  • RCA and Auto-sensing Speaker Level Inputs are located on the side panel, along with controls for Phase, Gain, LP Crossover and Remote Sub Level
  • The PWE-S8 is an Authorized Online Product Sold By and Shipped from Amazon; visit the store locator on the Alpine USA website for professional installation

3. Alpine R-W10D4, R Series Dual 4 Ohm Voice Coil 2250 Watts Subwoofer, 10″

  • Power Range: 300W-750W RMS. Power Handling: 750W RMS / 2250W Peak.
  • Parabolic Cone Structure with Pulp/Kevlar Cone & PP/Mica/Talc Dust Cap.
  • High Amplitude Multi-Roll surrounds (HAMR)
  • Magnet Weight: 111oz. Voice Coil Diameter: 65.5mm / 2.6″.
  • Sealed Box Net Internal Volume: 0.4-0.85 ft^3 Ported Box Net Internal Volume: 0.75-1.3 ft^3

4. Alpine R-SB12V Pre-Loaded R-Series 12-inch Linkable Subwoofer Enclosure

  • Includes preloaded R-W12D4 12” R-Series subwoofer
  • 750W RMS power handling
  • 12 Gauge OFC Speaker Box Wire
  • Ported enclosure design
  • Frequency response: 24-200 Hz

5. Alpine Subwoofer Package – Two S-W10D4 S-Series 10″ Dual 4-Ohm Subwoofers

  • The new S-Series subwoofers use a new design that’s almost 1-inch shallower than their predecessors
  • High-excursion underhung voice coil configuration
  • Reinforced parabolic cone structure with pulp/Kevlar con & PP/Mica/Talc Dustcap
  • 4.7″ mounting depth
  • Power handling: 250-600W RMS

6. Alpine SWT-S10 1200W Max (250W RMS) Single 10″ Sealed Subwoofer.

  • Brand: Alpine
  • MPN: SWT-S10
  • Type: Enclosed Non-Powered
  • Speaker Size: 10″
  • RMS Power: 250W

7. Alpine Electronics 2250W 12″ Subwoofer

  • Peak Power: 2250W
  • RMS Power: 750W
  • Frequency Response: 24Hz – 200Hz
  • 2 Ohm
  • 180ºC High Temp Wire on Sprial-Cut Aluminum Bobbin
  • 4-Layer Dual Voice Coil
  • Included components: owners manual

8. Alpine Type R 12 Inch 2250 Watt Max 4 Ohm Round Car Audio Subwoofer %7C R%2DW12D4

  • Power Range: 500W-750W RMS. Power Handling: 750W RMS / 2250W Peak.
  • Parabolic Cone Structure with Pulp/Kevlar Cone & PP/Mica/Talc Dust Cap.
  • High Amplitude Multi-Roll surrounds (HAMR)
  • Magnet Weight: 127oz. Voice Coil Diameter: 65.5mm / 2.6″.
  • Sealed Box Net Internal Volume: 0.55-1.0 ft^3 Ported Box Net Internal Volume: 1.0-1.5 ft^3

9. Alpine SWT-12S4 1500W Max (300W RMS) Single 12″ Sealed Subwoofer Tube Enclosure

  • 1500W Max Single 12″ Sealed Subwoofer Tube Enclosure
  • 12” (30cm) High-Performance Subwoofer
  • Overall Dimensions 12.75” x 26”
  • Frequency Response 28-200Hz
  • Speaker Impedance: 4 Ω

10. Alpine 10 Inch 1000 Watt Loaded Ported Truck Subwoofer Enclosure Box | SBT-S10V

  • Impedance: 2 ohms
  • Peak: 1000 watts
  • Frequency Response: 28-200 Hz
  • Subwoofer mounting depth: 4-5/32″
  • Dimensions: 7″D x 22″W x 16″H

Leave a Reply

Your email address will not be published. Required fields are marked *