Skip to content

Top 10 Best gpu vertical mount Review in 2022

1. EZDIY-FAB Vertical Graphics Card Holder Bracket Support with Multi-Angle,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black

  • The adjustable GPU bracket allows to show off their GPUs and enhance cooling efficiency by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud.
  • The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud
  • The latest riser cable connects the graphics card to the PCIe slot of the motherboard, a flexible TPE flat cable with a length of 200 mm. Only support PCIE3.0
  • Before buying, please confirm whether there is enough space inside the chassis to install
  • For long or heavier graphics cards, please adjust to an appropriate angle to avoid falling

2. LINKUP Vertical GPU Mount Loop Bracket Graphic Card Holder with LINKUP Ultra PCIe 4.0 X16 Gen4 Riser Cable 90 Degree Right Angle 20cm Black Kit

  • Heavy duty bracket to vertically show off GPU and water cooler. Compatible with most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots. ***Some cases may require cutting of metal pieces to fit***
  • Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU – RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800 / Chipset – x570, B550, B590, Z590.
  • Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount.
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity.

3. Lian Li O11DMINI-1 Vertical GPU Bracket KIT /PCIE 4.0 / Black -O11DMINI-1X-4

  • PCI-E 4.0 Riser Cable (Black)
  • PCIe Riser Cable : Gen 4.0
  • VERTICAL GPU BRACKET KIT
  • Vertical GPU mount accessory for the O11D MINI.
  • Bracket Kit Dimension: (D)180mm X (W)191.5mm X (H)272.5mm

4. EKWB EK-Loop Vertical GPU Holder, Shifted

  • EK-Loop Vertical GPU Holder is a steel mounting bracket that enables the user to mount the GPU vertically and show it off.
  • Made of 1-1.5mm thick black coated steel, the EK-Loop Vertical GPU holder is keeping your hardware safe and immovable even during transport or installation of tubing and fittings.
  • The premium-quality PCI-E riser cable in this vertical bracket is 200mm long.
  • Any GPU with a 1 or 2-slot I/O shield design is supported.
  • Material: Black-coated steel

5. NZXT H710i – CA-H710 i-BR – ATX Mid Tower PC Gaming Case – Front I/O USB Type-C Port – Quick-Release Tempered Glass Side Panel – Vertical GPU Mount – Integrated RGB Lighting – Black/Red

  • NEW FEATURES: Front I/O USB Type-C Port, Vertical GPU Mount, Tempered glass side panel with single screw installation, and upgraded Smart Device V2
  • SMART DEVICE V2: Includes a faster microprocessor for NZXT CAM-powered control of two RGB lighting channels and three fan channels that support either voltage regulated or PWM fans.
  • VERTICAL GPU MOUNTING: Show off your graphic card with a built-in mounting bracket for installing your GPU vertically *PCIe riser card not included
  • ENHANCED CABLE MANAGEMENT: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive
  • SPECS: Max GPU Clearance: 413mm, Radiaor Support – Front: 360mm, Top: 360mm, Rear: 140mm

6. InWin PCI-E Riser Cable & Socket Vertical GPU Kit

  • Product Type :Computer Component
  • Package Dimensions :5.5″ L X5.5″ W X8.0″ H
  • Country Of Origin :Taiwan
  • Package Weight :2.0Lbs

7. Phanteks PH-VGPUKT_02 – Universal Vertical GPU Bracket with 220mm Flat Line Pci-E X16 Riser Cable Kit

  • Compatible with chassis with “open” PCI slot design. Mudding might be required.
  • Included 220mm riser Cable. Supports PCIE3.0/2.0/1.0, Doesn’t Support PCIE 4.0
  • Easy Installation, placing tray over all seven PCI slot spaces
  • PCI Slot Required: 7. GPU Support: Dual Slot GPU.
  • Vertically Display a VGA Graphics card

8. EKWB EK-Loop Vertical GPU Holder

  • EK-Loop Vertical GPU Holder is a steel mounting bracket that enables the user to mount the GPU vertically and show it off.
  • Made of 1-1.5mm thick black coated steel, the EK-Loop Vertical GPU holder is keeping your hardware safe and immovable even during transport or installation of tubing and fittings.
  • The premium-quality PCI-E riser cable in this vertical bracket is 200mm long.
  • Any GPU with a 1 or 2-slot I/O shield design is supported.
  • Material: black-coated steel

9. HLT PCI- E 3.0 16X Graphics Card Vertical Kickstand/Base Magnetic Standoff DIY ATX case Computer Graphics Card Holder(Black with Extension Cord)

  • 1. kickstand dimension: 215 x 70mm(LxW
  • 2. PCI-E cable length: 20cm
  • 3.Magnetic standoff design
  • 4. Support PCI-E Low and high profile bracket card
  • 5. Suitable for PCI-E  x1, x4, x8 ,x16 Card

10. Coolermaster Universal Vertical GPU Holder Kit Ver.2

  • The vertical graphics card holder Kit allows vertical installation of a GPU to better show off the visual design of the GPU and its cooler.
  • The newly revised vertical graphics card holder kit fits all standard ATX chassis with at least 7 available PCI slots.
  • The position of the GPU can move back and forth to allow cables to pass through chassis with either closed or open PCI slots.
  • A high quality Cooler Master version 2 riser cable completes the vertical GPU holder package
  • Thick SGCC steel prevents the largest and heaviest GPUs from bending the GPU holder

Leave a Reply

Your email address will not be published. Required fields are marked *