Skip to content

Top 10 Best sundown audio sub Review in 2022

1. E-10 V.3 D2 – Sundown Audio 10″ 500W RMS Dual 2-Ohm EV.3 Series Subwoofer

  • RMS Power = 500-watts | Xmax = 14mm one-way by 70% BL | Vented magnetic gap
  • Vented pole piece with optimized geometry | Black Aluminum 2.5” voice coil former for superior heat dissipation | High Temperature 4-Layer copper voice coil wire
  • Spring Loaded Terminals | Stitched-On “Mini-XL” Tinsel Leads to prevent fatigue and failure
  • Specifications: DC Resistance (Re): 4.0 Ω | Resonance Frequency (Fs): 32.2 Hz | Equivalent Volume (Vas): 19.4 L | Electrical Q Factor (Qes): 0.38 | Mechanical Q Factor (Qms): 4.76 | Total Q Factor (Qts):0.35 | Force Factor (BL): 20.2 NA | Moving Mass (incl. Air Load) (Mms): 192.0 g | Suspension Compliance (Cms): 0.13 mm/N | Sensitivity: 84.2 dB 1w / 1m
  • Box Recommendations: Sealed: 0.5 cu ft | Ported: 1.0 cu ft | Displacement: 0.11 ft^3 | Cutout Diameter: 8-7/8″ | Outside Diameter: 10″ | Depth: 5 5/8″ | Recommended Tuning: 32hz | Recommended Port Area: 16 in^2

2. SA-8 V.3 D4 – Sundown Audio 8″ 500W RMS Dual 4-Ohm SA Series Subwoofer

  • SA-8 V.3 D4 – Sundown Audio 8″ 500W RMS Dual 4-Ohm SA Series Subwoofer
  • Specifications: DC Resistance (Re): 6.0 Ω | Resonance Frequency (Fs): 40.0 Hz | Equivalent Volume (Vas): 7.17 L | Electrical Q Factor (Qes): 0.392 | Mechanical Q Factor (Qms): 4.310 | Total Q Factor (Qts): 0.360 | Force Factor (BL): 22.06 NA | Moving Mass (incl. Air Load) (Mms): 126.6 g | Suspension Compliance (Cms): 125 μm/N | Sensitivity: 82.71 dB 1w / 1m
  • Box Recommendations: Sealed Enclosure Suggestion: Not Recommended | Ported Enclosure Suggestion: 0.5 – 0.75 cu. ft. @ 35 Hz | Displacement: 0.08 cu. ft. | Depth: 6.625 in |Outside Diameter: 8.375 in | Cutout: 7.375 in

3. Sundown Audio X-15 v3 D2 Pro 15″ Dual 2-Ohm 2000W RMS Bass Subwoofer

  • Authorized Sundown Audio Dealer
  • 2 Years Warranty

4. PAIR OF E-10 V.3 D4 – Sundown Audio 10″ 500W RMS Dual 4-Ohm EV.3 Series Subwoofers

  • RMS Power = 500-watts | Xmax = 14mm one-way by 70% BL | Vented magnetic gap
  • Vented pole piece with optimized geometry | Black Aluminum 2.5” voice coil former for superior heat dissipation | High Temperature 4-Layer copper voice coil wire
  • Spring Loaded Terminals | Stitched-On “Mini-XL” Tinsel Leads to prevent fatigue and failure
  • Box Recommendations: Sealed: 0.5 cu ft | Ported: 1.0 cu ft | Displacement: 0.11 ft^3 | Cutout Diameter: 8-7/8″ | Outside Diameter: 10″ | Depth: 5 5/8″ | Recommended Tuning: 32hz | Recommended Port Area: 16 in^2

5. Pair of SA-12 D2 REV.3 – Sundown Audio 12″ 750W Dual 2-Ohm SA Series Subwoofer SA12D2

  • 12″ 750W SA Series Subwoofer
  • Dual 2-Ohm
  • 750 watts RMS
  • RE: 4.57 Ohms
  • Fs: 33.71 Hz

6. Pair Sundown Audio SA-15 Rev.3 D4 15″ 1500 Watts Dual 4-Ohm SA Series Subwoofers Pair

  • RE (ohms): 7.75 | FS (Hz): 36.95 | Vas (L): 52.35 | Qes: 0.85 | Qms: 6.63 | Qts: 0.75 | Le (mH): 4.98 | BL (NA): 25.87 | Mms (Grams): 315
  • Cms (uM/N): 58.8 | Sens (1w/1m): 86.68 | Cutout Diameter: 14 1/8″ | Mounting Depth: 7 1/2″ | Overall Diameter w/ Gasket: 15 5/8″ | Displacement: 0.17ft^3 | RMS: 600 Watts
  • Recommended Box Specs (Sealed): 2.5ft^3 (Yields F3 of 41Hz) | Recommended Box Specs (Ported): 3.5ft^3 (Tune to 35Hz, Yields F3 of 28Hz) | 19.0mm X‐Max by 70% BL method one‐way (38.0mm peak to peak)
  • Thick black anodized aluminum voice coil formers for maximum strength and heat dissipation | 4‐layer copper high temperature voice coil windings with 45mm winding length | Double layer permanently bonded high strength Nomex spider pack for maximum longevity and durability | Thick flat tinsel lead wires tied down to the spider to prevent lead noise and breakage
  • Custom tooled triple joint support ring | Custom tooled frame spacer / ventilation ring | High efficiency air‐flow management integrated into the motor for maximum voice coil cooling | Dual Aluminum Faraday rings for reduced inductance and inductive distortion (pole cap and magnet ID) | Two‐Year Warranty against defects in materials and workmanship

7. SUNDOWN AUDIO SA-10 V.2 D2 10″ Dual 2 OHM 1000W RMS SUBWOOFER BASS Speaker New

  • RMS Power: 1000-watts
  • High Temperature copper voice coil wire
  • Spring Loaded Terminals
  • High strength cast aluminum frame
  • Optimized for small ported, sealed, & band-pass enclosures

8. SUNDOWN AUDIO SA-12 V.2 D4 12″ Dual 4 OHM 1000W RMS SUBWOOFER BASS Speaker New

  • RMS Power: 1000-watts
  • High Temperature copper voice coil wire
  • Spring Loaded Terminals
  • High strength cast aluminum frame
  • Optimized for small ported, sealed, & band-pass enclosures

9. Sundown Audio U-10 D2 10″ 1500W RMS Dual 2-Ohm U-Series Subwoofer

  • Features: Black Aluminum 3” voice coil former for superior heat dissipation, High Temperature Round-Wire CCAW voice coil with high-temp black adhesive, Double stitched surround, Heavy duty cast basket, Spring loaded terminals accept up to 8 gauge, Stitched-on double-XL tinsel leads, Rear vented pole piece, Rear drilled gap-venting, Innovative high-velocity cast aluminum vented frame spacer ring, Magnet ID shorting ring, Top-Plate Cooling Channels, Cast Aluminum surround bolt-on rings, Optimized
  • Specifications: 1500 Watts RMS | Linear X-Max by 70% | Magnet Diameter: 8.66 in. | DC Resistance (Re): 3.8 Ω | Resonance Frequency (Fs): 48.5 Hz | Equivalent Volume (Vas): 8.3 L | Electrical Q Factor (Qes): 0.35 | Mechanical Q Factor (Qms): 3.20 | Total Q Factor (Qts): 0.32 | Force Factor (BL): 26.8 NA | Moving Mass (incl. Air Load) (Mms): 216.3 g | Suspension Compliance (Cms): 0.05 mm/N | Sensitivity: 86.2 dB 1w / 1m
  • Box Recommendations: Sealed Enclosure Suggestion: 0.5 cu. ft. | Ported Enclosure Suggestion: 1.0 cu. ft. | Displacement: 0.21 cu. ft. | Depth: 7.007 in |Outside Diameter: 10.94 in | Cutout: 9.17 in | Recommended Tuning: 32 Hz | Recommended Port Area: 16 sq. in.

10. Sundown Audio U-15 D2 15″ 1500W RMS Dual 2-Ohm U-Series Subwoofer

  • Sundown Audio U-15 D2 15″ 1500W RMS Dual 2-Ohm U-Series Subwoofer
  • Specifications: DC Resistance (Re): 3.8 Ω | Resonance Frequency (Fs): 37.9 Hz | Equivalent Volume (Vas): 54.0 L | Electrical Q Factor (Qes): 0.34 | Mechanical Q Factor (Qms): 3.10 | Total Q Factor (Qts): 0.31 | Voice Coil Inductance (Le): 2.44 mH | Force Factor (BL): 30.7 NA | Moving Mass (incl. Air Load) (Mms): 355.7 g | Suspension Compliance (Cms): 0.05 mm/N | Sensitivity: 91.2 dB 1w / 1m
  • Box Recommendations: Sealed Enclosure Suggestion: 2.0 cu. ft. | Ported Enclosure Suggestion: 3.0 cu. ft. | Displacement: 0.24 cu. ft. | Depth: 9.05 in | Outside Diameter: 15.59 in | Cutout: 14.01 in | Recommended Tuning: 32 Hz | Recommended Port Area: 48 sq. in.

Leave a Reply

Your email address will not be published. Required fields are marked *