Skip to content

Top 10 Best Thermal Adhesive Review In 2022

Last Update:

You might have this question in your head which one is the most suitable Thermal Adhesive in 2022 that I can pick right now?

Don’t worry, we’ve analysis more than (62147) products and narrowed down a list of Best Thermal Adhesive for you. So that anyone can choose and make the right decision wisely.

Buying the desired product requires a considerable amount of thought into the investment. However, it all changes when the person decides to go for the best Best Thermal Adhesive. We understand that all situations and parameters; so without wasting time let’s drive deep and find the most suitable one.

Best Thermal Adhesive
AS AN AMAZON ASSOCIATE WE EARN AFFILIATE COMMISSIONS FROM QUALIFYING PURCHASES.

Comparison Chart for Best Thermal Adhesive

Prifix thermal adhesive Suffix

NoProductScoreAction
1GENNEL G109 10gram Thermal Conductive Glue9.8Check Price On Amazon
2Thermal Adhesive Tape 30mm by 25M9.4Check Price On Amazon
3MG Chemicals - 8329TFF-25ML 8329TFF Thermally Conductive Adhesive - Fast Cure Epoxy9.2Check Price On Amazon
4Thermal Adhesive Tape, 25m x 15mm x 0.20mm Double Side Thermal Tapes Cooling Pad Apply to Heatsink9.2Check Price On Amazon
5Halnziye 10Gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound for LED GPU Chipset Heatsink9Check Price On Amazon
6HOAOH Thermal Tape, 25m x 10mm x 0.20mm Double Side Thermal Adhesive Tapes Cooling Heatsink Pad Apply to LED8.6Check Price On Amazon
7MG Chemicals 8329TCS Thermal Conductive Adhesive8.2Check Price On Amazon
8sansheng 20mm x 25m Double Side Adhesive Thermal Conductive Tape for Heatsink LED8.2Check Price On Amazon
9Easycargo 10gram Thermal Conductive Glue Kit8.2Check Price On Amazon
10Zebra 4 x 6 in Thermal Transfer Polyester Labels Z-Ultimate 3000T Permanent Adhesive Shipping Labels 1 in Core 4 rolls 10031647SP8.2Check Price On Amazon

Table Of Content:

1. GENNEL G109 10gram Thermal Conductive Glue

  • Non-Electrical Conductive,Non-corrosive ,Non-toxic,Suitable for all heatsink without fixed clip.
  • Use for MOSFET, LED, heat sinks , North-south bridge, video card, Chipset, heat dissipation part, heat dissipation, electrical appliances, instruments and other industries.
  • It has good thermal conductivity and wide service temperature range(-60~250 degrees Celsius)
  • Thermal conductivity:> 1.2W/m-K, Do not use thermal glue “between CPU and HEATSINK”!
  • Package Includes : 1 x GENNEL G109 10g thermal glue

2. Thermal Adhesive Tape 30mm by 25M

  • HPFIX double side thermal adhesive Tape is a simple and practical heat conductive tape, very easy to use, even for beginners.
  • Thermally conductive tape has very strong adhesion and has good thermal conductivity.
  • HPFIX thermal tape has thermal conductivity 1.
  • Thermal tape is widely used for high power LED,High power power supply, Computer CUP, GPU, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip,Video Card RAM, DDR Memory Modules, SSD drives, new energy heating power.
  • Thermal tape heat conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature (80-120°C ).

3. MG Chemicals – 8329TFF-25ML 8329TFF Thermally Conductive Adhesive – Fast Cure Epoxy

  • Thermal conductivity of 0. 8 W/(m·K)
  • 1:1 mix ratio
  • Working life: 4 minutes, set time: 15 minutes
  • Cure time: 3 hours at room temperature or 15 minutes at 65 °c (149 °f)
  • Flame retardant – UL 94V-0 registered

4. Thermal Adhesive Tape

  • Thermal Adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate.
  • Thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • EFFICIENT THERMAL CONDUCTIVITY – The Thermal Pad based on silicone & a special filler outperforms generic and performance pads by far.
  • Thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding.

5. Halnziye 10Gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound for LED GPU Chipset Heatsink

  • Do Not Use Thermal Glue Between CPU Chip And Heat Sink, use it within 24 hours once opened.
  • Thermal conductivity:> 1.2W/m-K
  • Strength of connected buildings: 55 lb.
  • Features: thermal properties, strong adhesion
  • Application: apply to all heatsink no fixed clip thermal paste.

6. HOAOH Thermal Tape

  • Thermal Adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate.
  • Thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • EFFICIENT THERMAL CONDUCTIVITY – The Thermal Pad based on silicone & a special filler outperforms generic and performance pads by far.
  • Thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding.

7. MG Chemicals 8329TCS Thermal Conductive Adhesive

  • Good low temperature alternative to 1-part TC adhesives with inconveniently high cure temperature
  • Excellent 1. 44 W/(make) thermal conductivity
  • 1-to-1 mix ratio and 4 hours pot life
  • Stores and ships at slightly below room temperature — no freezing or dry ice required.
  • Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons

8. sansheng 20mm x 25m Double Side Adhesive Thermal Conductive Tape for Heatsink LED

  • Package included 1 roll.
  • Size (W x L): 20mm x 25m;
  • Material: glass fiber+ rubber; Strong adhesive
  • Used for attaching heatsinks to CPU GPU, high power LED, etc.
  • Noted: heatsink is not included

9. Easycargo 10gram Thermal Conductive Glue Kit

  • 10 gram high performance thermal glue with strong adhesion.
  • Thermal conductivity > 0.975 w/mk
  • Thermal Impedance: < 0.06
  • Can be applied for cooling the interface of cooler heatsink and GPU VRM VRAM PCB LED, BJT MOSFET transistor, Voltage regulator, IC Chips, etc.

10. Zebra 4 x 6 in Thermal Transfer Polyester Labels Z-Ultimate 3000T Permanent Adhesive Shipping Labels 1 in Core 4 rolls 10031647SP

  • Full length rolls: 4 x 6 in; 1 in core; 5 in roll diameter; 460 labels per roll; 4 rolls; 1,840 total labels.
  • Thermal transfer technology: Requires the use of a ribbon to print, compatible with Zebra desktop printers and other brands including Honeywell, Datamax, Intermec, Sato, and TSC.
  • Premium coated polypropylene label: Good smear/scratch resistance, excellent chemical resistance; can withstand temperatures from -65°F (-54°C) to 200°F (93°C).
  • Recommended use: Great for UPS, FedEx, and USPS shipping labels, address labeling, box labeling, warehouse, product identification, and distribution.
  • Zebra Tested: Tested and certified by Zebra engineers to provide optimal performance and reduce printer downtime.

Verdict- Best Thermal Adhesive

We have portrayed some good Thermal Adhesive with their features, durability, ease of usage, pros and cons. It will help you find the desired one as your requirements.

Furthermore, remember that every might not be suitable for your particular project. So we would suggest you, know your requirement first and grab the most suitable one with higher quality from our top 10 list.

Leave a Reply

Your email address will not be published.